Renault ALASKAN 2017 Скачать руководство пользователя страница 293

Страница: 293 / 340

Replacing

Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push and hold the release tab

A , and then move

the wiper blade down

➀

the wiper arm to re-

move.

3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm

until it clicks into place.

CAUTION

•

After wiper blade replacement, return the

wiper arm to its original position. Otherwise

the wiper arm or the engine bonnet may be

scratched and may cause damage.

•

Worn windscreen wiper blades can damage

the windscreen and impair driver vision.

The variable voltage control system measures the

amount of electrical discharge from the battery and

controls voltage generated by the alternator.
CAUTION

•

Do not ground accessories directly to the bat-

tery terminal. Doing so will bypass the vari-

able voltage control system and the vehicle

battery may not charge completely.

•

Use electrical accessories with the engine

running to avoid discharging the vehicle bat-

tery.

SDI2048Z

VARIABLE VOLTAGE CONTROL

SYSTEM (where fitted)

Maintenance and do-it-yourself

8-17

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Renault ALASKAN 2017, Руководство водителя, Страница: 293 / 340

Результаты поиска

Содержание ALASKAN 2017

Отзывы: