Renault ALASKAN 2017 Скачать руководство пользователя страница 285

Страница: 285 / 340

CHECKING PARKING BRAKE

From the released position, pull the parking brake

lever slowly and firmly. If the number of clicks is out

of the range listed, see an approved dealer or quali-

fied workshop.

7 to 9 clicks under a pulling force of 196 N (20

kg, 44 lb)

CHECKING FOOTBRAKE

WARNING

See an approved dealer or qualified workshop

for a brake system check if the brake pedal height

does not return to normal.
With the engine running, check the distance be-

tween the upper surface of the pedal and the metal

floor. If it is out the range listed, see an approved

dealer or qualified workshop.

Depressing force

490 N (50 kg, 110 lb)

LHD model

RHD model

Diesel engine

model

110 mm (4.3

in) or more

100 mm (3.9

in) or more

Petrol engine

model

109 mm (4.3

in) or more

Brake pad wear warning

The disc brake pads have audible wear warnings.

When a brake pad requires replacement, it will make

a high pitched scraping sound when the vehicle is in

motion. This scraping sound will first occur only

when the brake pedal is depressed. After more wear

of the brake pad, the sound will always be heard

even if the brake pedal is not depressed. Have the

brakes checked as soon as possible if the wear

warning sound is heard.
Under some driving or climate conditions, occa-

sional brake squeaks, squeals or other noises may

be heard. Occasional brake noise during light to

moderate stops is normal and does not affect the

function or performance of the brake system.
The rear drum brakes do not have audible wear indi-

cators. Should you ever hear an unusually loud noise

from the rear drum brakes, have them checked as

soon as possible by an approved dealer or qualified

workshop.
Proper brake inspection intervals should be

followed. For additional information, see a separate

maintenance booklet.

BRAKE BOOSTER

Check the brake booster function as follows:
1. With the engine off, depress and release the

footbrake pedal several times. When the brake

pedal movement (distance of travel) remains the

same from one pedal application to the next, con-

tinue on to the next step.

SDI1447AZ

DI1020MMZ

BRAKES

Maintenance and do-it-yourself

8-9

Содержание ALASKAN 2017





















































































































































































































































































































































Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды

Renault ALASKAN 2017, Руководство водителя

Результаты поиска

Содержание ALASKAN 2017

Отзывы:

Похожие инструкции для ALASKAN 2017

Бренды по названию

Популярные бренды