Regin Corrigo E series, Руководство пользователя

Страница: 54 / 105

Manual Corrigo E Ventilation, revision M Chapter 8 Access rights 54
8.3 Change password
As default Corrigo comes with the following passwords for the different levels:
System 1111
Service 2222
Operator 3333
Basic
5555
You can only change the password for log on levels lower or equal to the presently active level, i. e.
if you are logged in as System you can change all passwords, but as Operator you can only change
the Operator and Basic passwords. There is no point in changing the Basic password since access to
that level is granted automatically to all users.
Change password for
level:Operator
New password: ****
Note: Do not set the password for System to the same value as the password for a lower level since
this will prevent access to the System level.
Forgotten your password? If the password for System has been changed and then lost, a temporary
password can be obtained from Regin. This code is date dependent and only valid for one day.
8.4 Change password to remove automatic logoff
If you want to remove the automatic logoff, change the password of the desired level to 0000. After
changing the password, the level will always be activated.
Note: This should be done with consideration, since no alarm is continuously given that a certain
level has been activated. However, it is very useful in certain cases, if the unit is intended to be used
by educated personnel or for instance at commissioning.