1
Z-VENT
MODEL SVE SERIES III
INSTALLATION AND MAINTENANCE
INSTRUCTIONS
3” & 4”
SPECIAL STAINLESS STEEL VENTING SYSTEM
FOR GAS BURNING APPLIANCES
CATEGORY I, II, III, & IV
TESTED AND LISTED BY
UNDERWRITERS LABORATORIES INC.
UL 1738 & ULC – S636-95
Note the following before installation of Z-Vent
٭Examine all shipping components for possible shipping damage prior to installation. ٭
٭
The
Z-Vent
system must be free to expand and contract. Pipe must be properly supported.
٭
٭
Proper joint assembly is essential for a safe installation. Follow these instructions exactly as written.
Check severeness of joints upon completion of assembly.
٭
٭
Check for unrestricted vent movement through walls, ceilings and roof penetrations.
٭
٭
Different manufacturers have different joint systems and adhesives. Do Not Mix Pipe, Fittings or
Joining methods from different manufacturers beyond the flue collar adaptor.
٭
FLEXMASTER CANADA LTD
452 ATTWELL DR.
M9W 5C3
ETOBICOKE, ONTARIO
(416) 679-0045
Z-FLEX US, INC.
20 COMMERCE PARK, NORTH
BEDFORD, N.H.
03110-691
1(800) 654-5600
