Manual Corrigo E Ventilation, revision M
Chapter 7
Display, LEDs and buttons
51
7.4 Navigating the menus
From revision 2.3, significant changes have been made to the Corrigo menu system. The purpose is
to make the menu system more structured and user-friendly. The choice of access level/user access
determines which menus are shown.
The start display, the display normally shown, is at the root of the menu tree.
Regulator vent. sys
2008-11-20 13:30
System: Running
Sp: 18.0 Act: 18.2°C
Pressing DOWN
will move you through the menu choices at this, the lowest level. UP
will
move you back through the choices. Which menus are shown depends on which access level you are
using (see chapter 8 for more information about logging on to higher levels).
Using normal access, the access which normally does not require logging on, only a few basic
menus are shown:
Running mode
Temperature
Air control
Humidity control
Time settings
Access rights
In the menu Running mode, you can view and set the unit’s running mode, view selected control
functions and view the alarm events.
In the menus Temperature, Air control and Humidity control, you can view actual values and
setpoint values. Setpoints can only be changed if you have Operator or System access.
In Time settings, the time, date and set running times are shown. Values can only be changed if you
have Operator or System access.
Without logging on to Operator or System level, you are only authorised to change the unit’s
running mode and acknowledge alarms.
If you have Operator authority, you can access more information and change other operation
parameters like setpoints and time functions.
If you have System authority, you have full access to the complete menu system and can change all
parameters.
To enter a higher menu level, use UP or DOWN to place the display marker opposite the menu you
wish to access and press RIGHT
. If you have sufficient log on privileges the display will change
to the menu you have chosen. At each level there may be several new menus through which you
may move using the UP / DOWN buttons.
Sometimes there are further submenus linked to a menu or menu item. This is indicated by an arrow
symbol at the right-hand edge of the display. To choose one, use RIGHT again. To back down to a
lower menu level, use LEFT.
Change parameters
In some menus there are parameters that can be set. This is indicated by the yellow LED
flashing.
A quick blinking (2 times/sec) indicates that the parameter can be changed using the present user
access.
A slower blinking (1 times/sec) indicates that a higher user access is required to change the
parameter.
To change a parameter, first press the OK button. If you need higher authority than you have to
change the parameter, a log on menu will be displayed, see chapter 8 below. Otherwise, a cursor
will appear at the first settable value. If you wish to change the value, do so by pressing the UP /
DOWN buttons.
In numbers containing several digits you can move between the digits using the LEFT / RIGHT-
buttons.
When the desired value is displayed press OK.
Содержание Corrigo E series
Страница 1: ...Corrigo E manual Ventilation application...
