Regal 38 SAV 2019, Руководство пользователя

Страница: 76 / 297

76
Battery Board Circuit Breaker System
1. Stabilizer- This 100 amp breaker provides over
current protection for the optional Seakeeper cir-
cuit.
2-4. Auxiliary Charge- These three 80 amp
breakers provide over current protection for each
outboard stator output charging circuit. This is a
#6 wire traveling from the outboard to the break-
er back. One breaker is utilized for each engine
charging battery.
5. Cabin Main- This 60 amp breaker protects the
cabin main DC circuit to DC cabin panel.
6. Dash Main- This 80 amp breaker protects the
main DC circuit to the helm.
7. Electronics- This 50 amp breaker protects the
electronic component circuitry including plotters,
video camera, VHF radio, radar, Garmin remote,
ACC 1 and NMEA backbone as installed.
1 2 4 5 6 7 8 3
A
B
C
D
E
8. Windlass- This 90 amp breaker protects the
windlass circuitry installed at the foredeck.
Note if one of the above mentioned breakers “trips”
find the cause of the problem before resetting the
breaker. Push the handle down to reset.
Other Breakers, Fuses & Switches
A-B. ELCI Breakers- This stands for Equipment
Leakage Circuit Interrupter. This breaker and sys-
tem will be reviewed in the AC electrical section.
C. Deep Drop Reel Breaker (Option)- This break-
er protects the port and starboard deep drop reel
system primarily used to catch fish while vessel is
trolling in deep water.
D. Bow Thruster (Option)- This switch activates
or deactivates the bow thruster system used to
maneuver the vessel.
E. Bow Thruster Fuse- 200 amp DC fuse.