Regal 38 SAV 2019, Руководство пользователя

Страница: 235 / 297

235
Checking Engine Crankcase Oil
Your Yamaha
o u t b o a r d
f e a t u r e s 4
cycle engine
o p e r a t i o n .
Unlike 2 cycle
o u t b o a r d s
w h i c h m i x
gas with oil
technology, the 4 cycle engine uses crankcase
4 cycle oil to lubricate internal moving parts. This
operation is similar to automobile engine technology.
As part of this process, there is a dipstick placed in
the crankcase to offer periodic checking of engine
crankcase oil.
To check the crankcase oil do the following:
1. Ensure the outboard is setting in a flat vertical
position or the dipstick may not display an accurate
oil level.
2. Remove the crankcase oil dipstick and wipe it
clean.
3. Reinstall the crankcase oil dipstick completely
into the hole. Remove it again.
4. The oil level should be between the upper
and lower dipstick holes. .As needed add the
manufacturer’s recommended oil or contact your
closest dealer especially if the oil is contaminated
with water which will show a milky color verses a
clear look. Refer to the outboard manufacturer’s
owners manual for oil changing maintenance
schedules.
Checking/Filling Crankcase Oil- (Cont.)
When adding crankcase oil be sure to utilize the
manufacturer’s recommended type and viscosity.
For changing crankcase oil contact your closest
Regal dealer for additional information since they
have the special tools and knowledge for these
maintenance procedures.
OIL FILL PLUG