manualshive.com logo in svg

Regal 38 SAV 2019, Руководство пользователя

Поделиться
Скачать
Regal 38 SAV 2019 Скачать руководство пользователя страница 190

190

Cockpit Refrigerator (Typical)

If installed, the cockpit refrigerator provides chilled 
and frozen storage areas for food and beverage 
with a volume of 49 liters or close to 1.75 cubic feet  
capacity.  It features a brushed 316 grade stainless 
steel door and LED lighting along with an easy reach 
digital thermostat bank. The bin and bottle racks 
keep supplies secure in rough weather. Includes 
a freezer drawer. The unit operates at 12 volts DC 
voltage and draws approximately 6 amps along with 
requiring a minimum of 10.9 volts. 

Using Thermostat Control

Note the thermostat (temperature control ) in the 
above illustration. 

This device digitally sets the 

refrigerator temperature and features 5 individual 
temperature levels. 
Note the power “on” touch control on the right. The 
snow flake to the left is the power button on the 
refrigerator.

Note that an optional ice maker may  be installed 
with the same type of digital bank control feature.

DIGITAL TEMPERATURE CONTROL 

Usage Recommendations

•  If possible, the refrigerator should be turned on 

for about 6 hours prior to filling food items.

•  Frequent opening of the refrigerator door will 

result in greater consumption.

•  Ensure that nothing blocks the refrigerator vent.
•  Keep the inside of the refrigerator clean and dry.
•  Keep the surface of the door clean and dry.
•  The unit has been designed with a product lock 

protection in the event of low battery voltage. 
In the event of a compressor block, follow the 
instruction in the manufacturer’s owner’s manual 
or contact a marine technician.

•  Note that the compressor can operate up to 

angles of 30 degrees; greater angles can cause 
damage to the compressor.

•  Note that the unit contains refrigerant type 134 

A. In the event of a loss of refrigerant contact a 
qualified certified technician.

•  Periodically clean the condenser unit behind the 

refrigerator. Dust or vacuum the fan from any 
dust or lint debris.

•  See the manufacturer’s owner’s manual for 

defrosting instructions.

•  Consult the manufacturer’s owner’s manual for 

any troubleshooting information or contact your 
closest Regal dealer.

Содержание 38 SAV 2019










































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды