Regal 38 SAV 2019, Руководство пользователя

Страница: 92 / 297

92
AC Ship’s Panel Continued
Line Voltage/Current Meters
After the shore power 30 amp main breaker or
generator 50 amp breaker is activated line voltage
will display on the the main panel.
As sub panel equipment breakers are activated the
load current meter (extreme right side of panel) will
show an amperage draw. Normally the amperage
will ascend as more equipment breakers are acti-
vated and will descend as equipment breakers are
deactivated.
Shore power 1 & 2 Switch
The 120 volt shore power 1/2 switch is located
between the line voltage and load current meters.
With the shore power switch in the “center” posi-
tion it is off. When the shore power switch is tog-
gled to the left the line voltage meter will display
up to 120 volts available at Shore 1. As equipment
breakers are activated the load current (amper-
age) meter will ascend and descend as equipment
breakers are deactivated.
When the shore power switch is toggled to the
right the line voltage meter will display up to 120
volts available at Shore 2. As equipment breakers
are activated the load current (amperage) meter
will ascend and descend as equipment breakers
are deactivated.
The shore power 1 & 2 switch shows present us-
age equipment amperage can be a great tool for
balancing loads between panel legs. This will help
prevent circuit and panel overloads, power surg-
ing, and voltage drops.
As a general note on equipment breakers when
leaving the yacht it is recommended that most
breakers be turned off. It may be necessary if
items are left in the refrigerator to leave the shore
power cords hooked up and the battery charger
on during extended periods along with the cockpit
DC refrigerator since the charger keeps the bat-
teries up.