Regal 38 SAV 2019, Руководство пользователя

Страница: 134 / 297

134
Rod Holders
If installed, rod holders are located on the port and
starboard gunnel and/or may be located on the
transom.
The gunnel rod holders are 316 grade stainless for
durability and heavy duty fishing. They can be used
in conjunction with the optional Top Gun Outrigger
system. The fishing rod sits at an aft angle in the
rod holder while the outrigger controls the pole
line, holds the bait and keeps the line out over the
water while the boat is making headway. For trolling
purposes the fishing rod handle rests down inside
the rod holder. The gunnel rod holders also serve
as cup holders.
If installed the transom mounted rod holders are
useful for carrying a variety of fishing poles with
different pound line and outfitted for catching
specific fish. The transom rod holders provide a
quick and easy way to change out the fishing gear.
“Grand Slam” Outriggers (Option)
Outriggers Overview
If installed on your vessel the 15’outriggers are used
mainly for trolling. The twin outriggers accommodate
individual fishing pole riggs on each side of the
vessel.
Note that the outrigger nylon line must be attached
between the outrigger pole eyelets, snap swivel
and deck camel back, and bungee cord assembly
with pulley. Once the vessel is making headway
the fishing pole line is baited and attached to the
outrigger clip hardware at the extension poles. Then
the tensioning nut on the end of the outrigger is set.
Once this is done with the fishing pole resting in
the rod holder the fishing line is left to unwind while
the outrigger is positioned and the line distance is
achieved. At this point the correct drag adjustment
can be set on the fishing pole reel. When a fish
“strikes” the line is released from the outrigger clip
and the fish is retrieved with the fishing pole.
If installed, refer to the outrigger information found
in the owner’s information satchel which will help
keep your outriggers in top condition.
TYPICAL ROD HOLDERS
TYPICAL OUTRIGGERS