Regal 35 Sport Coupe, Руководство пользователя

Страница: 129 / 214

31
Equipment Operation
EXTERIOR EQUIPMENT
There are several groups of equipment located on the deck
and cockpit of your vessel. Some are standard and others
are optional equipment.
For the most in-depth informa-
tion, refer to that particular equipment manufacturer’s
manual located in the owner’s document pouch.
Equipment or vendors may change during a boat’s life cycle.
Portions of the components discussed here may or may not
be on your vessel. They may vary visually or in description
. Regal retains the right to change vendors, equipment,
specifications and other technical data at any time.
WINDLASS
If equipped, the windlass is used for anchoring. It features
a chain and anchor. There are dual operating foot controls
on the forward deck. These foot controls operate the
anchor up or down by stepping on the appropriate foot
button. The deck foot controls work independently of
the dash switch which is a two way toggle switch located
on the dash panel featuring a red lock-out button. Note
that the lock-out button in the “off” position prevents
the windlass from accidentally letting the anchor out.
Be sure to familiarize yourself with the windlass owner’s
manual before attempting to operate it.
Keep all body parts and loose clothing clear of the chain
and gypsy to avoid personal injury. The windlass should
not be the only means of releasing the anchor. Never use
the windlass under power with the emergency handle
inserted into the clutch
nut or gypsy cap.
To let out the anchor make
sure the gypsy is locked and
the safety lanyard is off the
anchor chain. Use the down
foot control or the dash
switch to let the anchor out
while backing down slightly
in reverse.
We recommend that the
vessel’s engines are used in
reverse slightly to break the
anchor loose instead of the windlass. Once loose, press the
up foot control switch or use the dash switch to retrieve
the anchor. As the anchor approaches the boat slow the
process down so the bow is not damaged by the rising
anchor. Maintain sufficient chain tension to control
the vessel and prevent the bow from swinging. Before
maintenance is performed, remove the chain from the
gypsy and rope from the drum. Periodically spray down
the outer casting of the anchor windlass. Use only chain
and spare parts as recommended by the manufacturer.
Note that the anchor features a safety lanyard that must
be released for the anchor to be operated through the
windlass controls. Reconnect lanyard after retrieving
anchor.
Up Foot Control
Down Foot Control
Windlass
Chain Guard
Chain
Windlass
Emergency
Handle
Safety Lanyard
TYPICAL WINDLASS