Regal 35 Sport Coupe, Руководство пользователя, Страница: 183 / 214

2
Chapter 10
STERN DRIVE
†
Change engine and stern drive oil along with steering
fluids.
†
Remove drive. Perform maintenance as referenced in
the manufacturer’s owners manual including checking
seals for vacuum and pressure at an authorized dealer.
† Check all belts for wear and tension.
† Remove propeller. Refurbish as needed.
† Touch up paint on stern drive upper and lower gear
housings as required.
† Apply rust inhibitor to driveshaft & universal joints.
†
Check exhaust, fuel, and cooling systems for leaks.
† Keep the unit trimmed down to assist in draining any
water still in the exhaust system. Also, this position allows
the universal to set without extra pressure on the bearings.
BOAT
†
Check hull bottom for any fiberglass damage. Repair
as needed.
†
Apply marine wax to hull and deck surfaces.
†
Pour a pint of 50/50 antifreeze into bilge pump.
† Remove batteries. Charge as needed.
† Remove all loose gear from boat such as life jackets,
etc. Inspect and store in a cool, dry environment.
† Remove drain plug. Clean drain plug hole of debris
as needed. Enclose drain plug in plastic bag and tie to
steering wheel.
† Drain the waste system per instructions in this
chapter. Make sure bow is higher than stern to permit
proper drainage.
†
Clean all upholstery and store in a dry environment.
† Conduct a visual inspection to ensure boat is balanced
properly on the trailer, cradle or blocks.
†
Cover boat with tarp. Tie down for wind protection
if outside. Prop tarp up as needed to provide additional
ventilation. Be sure not to cover up the fuel vents.
† Drain the fresh water system per instructions in this
chapter