Door control
FireProV2
Manual
Please keep this manual with attachments carefully!
4
2 Safety instructions
This manual is translated from the original Dutch manual, In the event of discrepancies between
the two, the Dutch version shall prevail.
Read this manual carefully before starting work on this
Control unit. Check the screw connections before this control unit becomes operational.
Caution:
before starting work on this control, first
Disconnected the power supply and disconnect the poles of the batteries.
Performing work on this control under tension is life-threatening & can cause serious
injuries!
Only qualified personnel with appropriate equipment and knowledge are permitted to carry
out work on this control. Qualified personnel means persons who are familiar with the
installation, configuration, commissioning & operation of electrically driven door, gate
installations. They must be able to assess the complete installation, identify possible
hazards and apply the necessary safeguards.
2.1
Relevant Safety requirements:
The safe use of this control can only be guaranteed when used as intended. The manufacturer is
not responsible for damage that has occurred due to external components or non-compliance with
these instructions.
Modifications are only permitted in accordance with the manufacturer. If modifications are applied
without the manufacturer's consent, the manufacturer's declaration is not valid.
During installation, commissioning, maintenance and control of the controller shall
Specific case applicable in compliance with the safety and accident prevention rules
to be taken.
Only apply safety products (as: safety edges and photocells which comply with applicable
standards.)
The manufacturer accepts no liability for damage resulting from operating and connection errors,
neglect of the operating instructions or inadequate maintenance and / or service, and again refers to
the possible occurrence of dangerous situations.
Despite conformity with harmonized standards, not every possible hazard can be foreseen. For this
reason, people should only enter the danger zone if this is necessary.
If in doubt about the installation, do not proceed and contact the
Technical Service for clarifications.
All information on this document (photos, drawings, characteristics and dimensions) may be
subject to change without prior notice.
Please read this manual carefully and keep this manual with
Attachments carefully!
