Raytech CAPO 2.5, Инструкция по эксплуатации

Страница: 114 / 117

Preliminary
Raytech AG Switzerland shall at their option and expense, repair or replace any part or parts that
prove to be defective within the warranty limitation period- irrespective of the operating time of the
test equipment provided that the cause of the defect occurred prior to the time at which the risk
was passed.
Warranty claims are subject to a warranty limitation period of 24 months from the date of shipment.
The purchaser is obligated to immediately notify Raytech AG Switzerland in writing of any defects
of the supplied test equipment.
Raytech AG Switzerland must always be given the opportunity to rectify a defect within a
reasonable amount of time. The purchaser shall grant an adequate amount of time that the test
equipment shall be repaired.
Raytech AG Switzerland covers the costs associated with the repair of the defect; especially the
costs for the material and work. Cost for sending the faulty test equipment shall be borne by the
purchaser. Raytech AG Switzerland shall not be liable for material damage, or financial loss due to
the loss of production, loss of data, loss of information, data or interest, regardless of their legal
basis.
Warranty claim rights on replacement parts as well as repair of defective parts shall expire after 12
months.
Warranty limitation period shall be extendable according to the price list. The purchaser has the
right to extend the warranty period by purchasing additional warranty years.
I.1 Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from:
• Improper and unauthorized modifications or misuse and abuse of the product, negligence,
alteration, modification, faulty installation by the customer, customer’s agents or
employees.
• Attempted or actual dismantling, disassembling, service or repair by any person, firm, or
corporation not specifically authorized in writing by Raytech AG Switzerland.
•
Defects caused by or due to handling by carrier, or incurred during shipment, trans-
shipment, or other move.
•
Inadequate maintenance by the customer, second source supplied software or interfacing,
operation outside the environmental limits, or improper site preparation.
Exclusive remedies provided herein are the customer’s sole and exclusive remedies.
Raytech Switzerland shall not be liable for any damages resulting from the use of this equipment
whether direct, indirect, special, incidental, or consequential damages, or whether based on
contract, tort, or any other legal theory.
90315-1.2 Instruction Manual CAPO
Page 114 of 117