Raytech CAPO 2.5 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 117

Raytech CAPO 2.5 Скачать руководство пользователя страница 112

Preliminary

Overheating:
If the CAPO is overheated (e.g. due to high
current, high output voltage over a long period of
time) the red symbol appears.
The CAPO protect itself, it stops the
measurement and will not allowed to start a
measurement till the temperature dropped to a
normal value.

H.1 Touch Panel does not work

Connect a USB mouse to the USB port and control the instrument with it.
The instrument will automatically display a cursor and everything can be done by mouse.
See chapter 8.2.7.1.4 Cursor on page 59.

Try to recalibrate the touch panel: See chapter F.1 Calibrate Touchscreen on page 104.

H.2 USB Memory Stick does not work

There are a few unsupported memory sticks available on the market. Please use another model or
brand and try again.

1

Depending on the type of formatting of the USB-stick, it can take up to 15 seconds until the stick is recognized. But this is really
seldom.

90315-1.2 Instruction Manual CAPO

Page 112 of 117

INFO:

INFO:

The CAPO is designed to be trouble free. If problems or questions do arise,
please contact your nearest representative or our service support group in
Switzerland

«
...
110
111
112
113
114
...
»

Содержание CAPO 2.5






















































































































Отзывы:

Нет отзывов