Raymarine CAM300, Инструкция по установке и эксплуатации

Страница: 33 / 94

9.1 Network cable connector types
There are 2 types of applicable network cable connectors — RayNet and
RJ45.
Connector Description
RayNet
RJ45
9.2 Network connection
The CAM300 can be connected to equipment featuring either a RayNet or
RJ45 network connector. An adapter cable must be used when connecting
the camera to equipment featuring a RayNet network connector.
The following section will provide two different network connection scenarios
that may be applicable when connecting the camera to your equipment:
1. p.33 — PoE network connection
2. p.33 — Non-PoE network connection
Warning: Powering PoE devices
PoE devices can be powered via an ethernet connection (PoE)
OR via a dedicated power cable.
NEVER connect a PoE device’s dedicated power cable when it
is being supplied PoE.
When the PoE device’s dedicated power cable is not
connected, any bare end wire connections must be separately
covered with insulation.
PoE network connection
1. CAM300.
2. PSE (Power Sourcing Equipment) providing PoE (Power over Ethernet)
to the camera (Axiom XL currently illustrated).
3. RJ45 to RJ45 waterproof coupler (4115028 — not supplied ).
4. RayNet (female) to RJ45 (male) adapter cable (A62360 — not supplied ).
5. Camera power cable — DO NOT CONNECT if the camera is being
supplied PoE (Power over Ethernet).
For details on the available network hardware and cables, refer to the
following section:
p.80 — Spares and accessories
Non-PoE network connection
1. CAM300.
2. Raymarine® multifunction display.
3.
RJ45 to RJ45 waterproof coupler (4115028 — not supplied ).
4. RayNet (female) to RJ45 (male) adapter cable (A62360 — not supplied ).
Network connections 33