Raymarine CAM300, Инструкция по установке и эксплуатации

Страница: 18 / 94

4.1 Parts supplied
List of parts supplied in the product box.
Item
Description
1 CAM300 — includes an approximate 670 mm (2.2 ft) fitted
cable, featuring an RJ45 (male) and power connector.
2
Mounting screws (x3) — self-tapping 3.5 mm x 32 mm A4.
3 Documentation.
4 Hex wrench (Allen key), M3.
5 Waterproof gasket.
Note:
A RayNet to RJ45 adapter cable is also required when connecting
the camera to a compatible Raymarine® multifunction display or
network switch. For further information, refer to the following section:
p.80 — Spares and accessories
4.2 Inline fuse requirement
Your product requires a suitably-rated inline fuse to be fitted to the red power
wire, housed in a waterproof fuse holder.
This fuse and its fuse holder are NOT supplied with your product, and must
be obtained separately, from a marine or electrical retailer.
1. Waterproof fuse holder.
2. Suitably-rated inline fuse.
Fuse ratings:
• Voltage rating — must be equal to or greater than the voltage of your
vessel’s power supply.
• Current rating — refer to the appropriate Inline fuse and thermal breaker
rating section of this document for further details.
Inline fuse and thermal breaker ratings
The following inline fuse and thermal breaker ratings apply to your product:
Inline fuse rating Thermal breaker rating
250 mA 3 A
Important:
The suitable fuse rating for the thermal breaker is dependent on the
number of devices you are connecting. If in doubt consult an authorized
Raymarine® dealer.
18