Raymarine CAM300, Инструкция по установке и эксплуатации

Страница: 37 / 94

PoE injector power connection
The CAM300 can also be powered using a PoE injector.
1. CAM300.
2. Raymarine® multifunction display.
3. PoE injector (4113746 — not supplied ).
4. RayNet (female) to RJ45 (male) adapter cable (A62360 — not supplied ).
5. 12 / 24 V dc power supply providing power to the PoE injector.
6. Camera power cable — DO NOT CONNECT if the camera is being
supplied PoE (Power over Ethernet).
For further information on the cabling required, refer to the following section:
p.83 — RayNet to RJ45 adapter cables
Network cable extensions
If you wish to extend the length of a network cable connected to your
product, you can refer to the following section for further information:
p.80 — Spares and accessories
PoE LED indication
The following blue LED will illuminate when the CAM300 is being supplied
PoE:
If the LED is not illuminated after you have connected the RJ45 connector to
either a PSE or PoE injector, refer to the troubleshooting information found
within the following section:
p.70 — PoE power connection troubleshooting
PoE power connections
37