Raymarine CAM300, Инструкция по установке и эксплуатации

Страница: 13 / 94

3.1 Product overview
The CAM300 is an infrared illuminated (I 2 ) eyeball IP camera with both day
and night vision. In conjunction with a compatible multifunction display, the
camera provides a high-definition image which can be viewed or recorded
for later playback.
Note:
• A single CAM300 video feed can be displayed on a maximum of 3
compatible Raymarine® multifunction displays at the same time (via each
display’s Video app).
• The video streams of up to 4 CAM300 cameras can be displayed
simultaneously on a single compatible Raymarine® multifunction display.
The camera has the following features:
• 3 mega pixel 1/4” CMOS image sensor.
• 1.8 mm wide-angle 3 megapixel sensor, with a 160° Horizontal x 130°
Vertical Field Of View (FOV).
• 10 m (33 ft.) I
2
(infrared) beam emitter distance.
• Multi-streaming of H.264 and H.265.
• Support for image resolutions up to 2304 x 1296 (3MP max).
• Image flip function, for ball-up (upright), or ball-down (upside-down)
installation.
• Image invert function, for reverse video applications (e.g. camera pointing
in the opposite direction to the vessel).
• ONVIF (Profile S) support, for compatibility with a wide range of security
systems and applications.
• Mechanical IR cutout filter for true day / night operation.
• Supports augmented reality features, via the optional AR200 sensor and
a compatible Raymarine® multifunction display.
• Waterproof to IPx6.
• 12 V dc power.
• Class 1 PoE device for easy single cable installation for both power and
data signals.
Power over Ethernet (PoE)
Power over Ethernet (PoE) is a system that allows electrical power to be
passed from a PSE (Power Sourcing Equipment) to a PD (Powered Device),
via a single ethernet connection. This means that one ethernet cable can
provide both power and data to a compatible device, simplifying installation.
The CAM300 is a Class 1 PD (Powered Device), which consumes 1 W Nominal
/ 1.8 W Maximum (IR LEDs ON), @ 12 V dc. Before connecting the camera,
ensure that your PSE’s maximum power output will not be surpassed. For
further information on your PSE’s maximum power output, refer to the
instructions that accompany the device.
Approximate recording storage space consumption
The maximum amount of recording time is dependent upon the camera’s
resolution, settings, lighting conditions and the amount of storage space
available upon your connected device.
When set to factory default settings, the CAM300 video stream will
approximately require 7.1 MB of storage space per minute; allowing up to 140
minutes of recording per 1 GB of storage space available on a connected
multifunction display or PC.
Product and system overview
13