Raymarine CAM300, Инструкция по установке и эксплуатации

Страница: 56 / 94

Note:
(2) This setting is not supported by the CAM300.
(3) The Automatic (Active Mode) setting is not supported by the CAM300.
(4) Flipping and / or reversing the camera’s image via a MFD or the
Web browser user interface will prevent augmented reality objects from
appearing correctly onscreen. It is recommended instead that you attempt
to rotate the camera ball by hand to the correct orientation. For further
information on how to correctly orientate your camera by hand, refer to the
following section:
p.28 — Mounting
Privacy Zone
Menu item and description Option(s)
[Privacy Zone]
Enables you to turn the Privacy Zone settings either
On or Off.
• [On]
• [Off]
[Window 1–4] (5)
Enables you to select up to 4 Windows which will
be hidden from the live video feed display. Each
Window can be:
• (PC ONLY) Moved, by clicking and dragging the
Window across the video feed preview.
• (PC ONLY) Resized, by clicking and dragging
the white box located at the bottom right of the
Window.
• Toggled On or Off, by clicking the corresponding
button(s) located underneath the video feed
preview.
This setting will only function if you have Enabled
the Privacy Zone setting.
• [On]
• [Off]
Note:
(5) This setting is not supported on a multifunction display Web interface.
Network Config
The [Network Config] subsection contains a set of changeable IP address
and network port settings.
Under normal circumstances the network configuration settings should not
need to be changed.
Network Config
Menu item and description Option(s)
[IP Type] (6)
Enables you to change whether the camera’s IP
address is Static or assigned via DHCP (Dynamic
Host Configuration Protocol).
By default, this setting is set to DHCP.
• [DHCP]
• [Static]
[Auto IP] (6)
Allows you to change whether the camera’s IP
address is automatically assigned.
By default, this setting is set to Disable.
• [Enable]
• [Disable]
[IP Address]
Enables you to manually configure your camera’s
IP address.
This setting is only available if you have set the IP
Type setting to Static.
• [IP Address Field]
[Subnet Mask]
Enables you to configure your Subnet Mask setting.
This setting is only available if you have set the IP
Type setting to Static.
• [Subnet Mask
Field]
[Gateway]
Enables you to configure your default Gateway
setting.
This setting is only available if you have set the IP
Type setting to Static.
• [Gateway Field]
56