Raymarine a67, Инструкция по установке и эксплуатации, Страница: 43 / 330

4.5 Network connections
You can connect a number of digital devices to your multifunction display using the Network connector(s) at the rear of the unit.
A typical network of digital devices may include:
• Up to 6 Raymarine multifunction displays.
• SeaTalk hs or RayNet digital devices such as a sonar module and radar scanner.
• Ethernet IP cameras.
Note: Your multifunction display includes the following network connectors:
• e7, e7D, a65 and a67 = 1 x SeaTalk hs / RayNet connector.
• New c Series and New e Series (excluding the e7 and e7D) = 2 x SeaTalk hs / RayNet connectors.
Networks requiring additional network connections will require a Raymarine network switch.
Typical SeaTalk hs network
D 12251-1
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
SeaTalk
hs
/ RayNet
SeaTalk hs / RayNet
3 4 2 2 1
1. Raymarine network switch.
2. Multifunction display.
3. Raymarine radar scanner.
4. Thermal camera.
Note: New a Series displays do not support connection to a thermal camera.
Network hardware
Item Part number Notes
HS5 SeaTalk hs network
switch
A80007 5–port switch for
network connection
of multiple SeaTalk
hs
devices featuring
RayNet connectors.
Equipment with
SeaTalk
hs connectors
can also be connected
via suitable adaptor
cables.
SeaTalk hs network
switch
E55058 8–port switch for
network connection
of multiple SeaTalk
hs
devices.
Item Part number Notes
SeaTalk hs crossover
coupler
E55060 Enables direct
connection of
SeaTalk
hs devices
to smaller systems
where a switch is
not required. Also
enables the connection
of SeaTalk
hs devices
to an HS5 SeaTalk hs
network switch (in
conjunction with a
RayNet to RJ45 cable).
Ethernet Coupler R32142 Enables direct
connection of ethernet
or SeaTalk
hs devices
to smaller systems
where a switch is not
required. Also enables
the connection of
ethernet or SeaTalk
hs
devices to an HS5
SeaTalk
hs network
switch (in conjunction
with a RayNet to RJ45
cable).
Cables and connections 43