Raymarine a67, Инструкция по установке и эксплуатации, Страница: 239 / 330

Note: In the steps above <Camera Name> represents the
default feed name provided by the connected device or the
custom name which can be assigned to the feed.
Turning off camera cycling
You can turn off camera cycling using the methods detailed
below.
From the camera application, with camera cycling turned on:
1. Select Menu > Camera Cycling > Camera Cycling so that
Off is highlighted, or
2. Change the camera / video feed manually as described
earlier in this section, or
3. Press the Back button (applicable to New c Series and New
e Series only).
Naming camera / video feeds
To aid selection of feeds you can name each feed.
From the Camera application:
1. Select the feed you want to name so that it is displayed on
the screen.
2. Select Menu .
3. Select Edit Name .
The on-screen keyboard is displayed.
4. Enter the name you want the feed to be called.
5. Select SAVE to save the new name for the feed.
The name of the feed is displayed in the camera application’s
status bar.
Adjusting the video image
If supported by your connected camera / video input device or
networked IP camera, you can adjust the video image.
With a video feed displayed in the camera application:
1. Select Menu .
2. Select Contrast , Brightness , or Color , as appropriate.
The numeric adjust control is displayed.
3. Adjust the level to the required setting.
Selecting the aspect ratio
If supported by your connected camera / video input device or
networked IP camera, you can manually change the aspect ratio
between 4:3 and 16:9.
From the camera application with a feed displayed:
1. Select Menu .
2. Select Aspect ratio so that 4:3 or 16:9 is selected as
required.
Camera application
239