Raymarine a67, Инструкция по установке и эксплуатации, Страница: 325 / 330

PIN Signal
13 VIDEO IN2 RTN
14 RED RTN
15 RED
Appendix D Switch panel application
Vessel control and monitoring systems
When integrated with a vessel control and monitoring system
your multifunction display can provide monitoring and controls
for your power circuits, breakers, switches and equipment.
The Switch Panel application can be used to:
• Show the status of power circuits, breakers, switches and
other equipment.
• Apply power to each circuit individually.
• Reset tripped breakers.
• Control power to individual equipment.
• Alert users to a tripped circuit.
Vessel control and monitoring system connection
The multifunction display can connect to and control an
EmpirBus NXT vessel control and monitoring system.
D12738-1
1 2 V dc
1
2
4
3
5
1
Raymarine multifunction display.
2 EmpirBus NXT DCM (dc module).
3 SeaTalk ng to DeviceNet adaptor
cable.
4 EmpirBus NXT MCU (Master control
unit).
5 12 V dc supply into backbone.
Note: Ensure your vessel control and monitoring system has
been installed in accordance with the instructions provided
with the system.
Switch panel configuration
The switch panel application must be configured.
A Configuration file can be obtained from the system supplier.
Loading a configuration file
The switch panel application will only be available when a valid
configuration file has been loaded.
1. Obtain the configuration file from the system supplier.
2. Save the configuration file to the root directory of your
memory card.
Switch panel application
325