Raymarine a67, Инструкция по установке и эксплуатации, Страница: 326 / 330

3. Insert the memory card into the card reader on your
multifunction display.
4. From the homescreen select Set-up .
5. Select System Settings .
6. Select External Devices .
7. Select Switch Panel Set-up .
8. Select Install Config File .
9. If prompted select the memory card slot that contains your
configuration file.
The file browser is opened.
10. Select the configuration file.
11. Select OK .
You can now add the Switch panel application from the
Customize menu on the homescreen.
Note: If your multifunction display only has 1 card slot then
step 9 is skipped.
Switch panel overview
The switch panel application is used to monitor and control
compatible vessel control and monitoring systems. The pages
and page layouts and vessel schematics are configured at
installation and are unique for each vessel. The images below
are examples.
Example 1 — Switch panel mode page
If configured a Mode page provides controls to switch between
pre-configured modes.
In the example above selecting a mode icon will place the
system into the selected mode.
You can cycle through available pages to monitor or control
switches and configured groups of switches.
Example 2 — Vessel controls page
1
3
5
2
4
6
D12739-1
1 Toggle switch.
2 Rotary (multi-state) switch.
3 Position control switch.
4 Momentary switch.
5 Data item (dial gauge).
6 Data item (tank level).
Using the switches on a Touchscreen
This only applies to HybridTouch displays.
From the switch panel application:
1. Toggle switch — Select the switch to switch on or off.
2. Rotary control — Selecting the rotary control will cycle
through its available states.
3. Position Control — Select and hold on a direction to move.
4. Momentary switch — Select the switch to activate.
5. Dimmer switch — Select and then drag the control to adjust
the value.
Using the switches
From the switch panel application:
1. Use the Joystick to highlight the relevant switch.
2. Toggle switch — Press Ok to switch on or off.
3. Rotary control — Pressing Ok will cycle through its available
states.
4. Position Control — Press Ok and use the Joystick to move
direction.
5. Momentary switch — Press Ok to activate.
6. Dimmer switch — Press Ok on the switch and use the
Rotary Control to adjust the value, then select back to exit
adjust mode.
Resetting a tripped circuit
When a circuit is tripped a pop-up message will be displayed
on-screen providing details of the tripped circuit and options, the
circuit will also be identified as tripped in the switch panel pages.
1. With a tripped circuit pop-up message displayed select
Reset . to reset the tripped circuit, or
2. Select the switch on a switch panel page to reset the tripped
switch.
Note: Performing multiple resets risks causing damage to
your system so if a trip persists check the main circuits.
326 New a Series / New c Series / New e Series