Raymarine a67 Скачать руководство пользователя страница 126

Страница: 126 / 330

Select

Yes

to enter a name for the buddy vessel

ii. Select

to save the vessel to your buddy list without

entering a name for the buddy vessel.

The vessel will now be added to your buddy directory.

Adding a vessel to your buddy list from AIS
target list

1. If you are in the chart application, goto

Menu > AIS Options

2. If you are in the radar application, goto

Menu > Track

Targets > View MARPA & AIS Lists

3. Select

View AIS List

The AIS Target List is displayed.

4. Select an AIS target.

5. Select

Add Buddy

Select

Yes

to enter a name for the buddy vessel

ii. Select

to save the vessel to your buddy list without

entering a name for the buddy vessel.

The vessel will now be added to your buddy directory.

Editing a buddy's details

From the chart or radar application:

1. Select the AIS buddy target.

The AIS buddy context menu is displayed.

2. Select

View Buddy List

3. Select the buddy you wish to edit.

The Buddy options dialog is displayed.

4. To change the MMSI number select

Edit Buddy MMSI

or.

The MMSI number must be 9 digits.

5. Select

Edit Buddy Name

to change the buddy name.

This could be the name of the vessel, or the name of the
friend who owns the vessel, for example

6. Enter the new details and select

SAVE

You will be returned to the buddy list.

Deleting a buddy

From the chart or radar application:

1. Select the AIS buddy target.

The AIS buddy context menu is displayed.

2. Select

Remove Buddy

3. Select

Yes

to confirm.

The buddy has now been removed from the directory.

The buddy directory can also be accessed via the chart
application (

Menu > AIS Options > View Buddy Directory

), or

the radar application (

Menu > Track Targets > MARPA & AIS

Lists > View Buddy Directory

Displaying additional buddy information

From the chart or radar application:

1. Select the AIS buddy target.

The AIS buddy context menu is displayed.

2. Select

Buddy Data

so that On is highlighted.

Selecting Buddy Data will switch data between On and Off.

The Buddy MMSI and Name will now be displayed next to the
buddy icon.

126

New a Series / New c Series / New e Series

Содержание a67











































































































































































































































































































































Результаты поиска

Содержание a67

Отзывы:

Raymarine a67, Инструкция по установке и эксплуатации, Страница: 126 / 330

Результаты поиска

Содержание a67

Отзывы: