Rapid Technic Orbito, Руководство по эксплуатации

Страница: 214 / 244

214 Machine No. from 10005200
EN
4.20 Freewheeling lever
The hydraulic motors are mechanically separated from the wheel axle using the left and
right freewheeling levers.
4.21 Attachment locking lever
The attachment lock locks the coupled attachment by means of the bolt.
By actuating the attachment locking lever, the bolt releases the lock. In this condition, the
attachment can be coupled or uncoupled.
4.22 Operational hour counter/ speed indicator
The operational hour counter counts the operating hours and records the engine speed
(LCD display).
The operating hours can only be read if the engine is switched off. While the engine is
running, the engine speed is shown. The operational hour counter cannot be reset. It has its
own battery welded to the housing.
4.23 External intake port
The external intake port improves the intake situation when working in a dusty environment.
The higher position of the intake opening reduces the intake of dirt and cuttings.
The freewheeling mechanism is enabled by swivelling the
levers 180° towards the front (2).
The freewheeling mechanism is disabled by swivelling to the
starting position (1).
2 1
Note
If the freewheeling mechanism is blocked, it can be released by rotating the wheel.
With freewheeling enabled:
• the machine can be pushed by hand.
• the machine can be towed away.
• it no longer has the braking effect of the hydraulic system.
Warning
The machine may suddenly trap the operator or third persons, cause them to fall over or
run them over.
• Never enable "freewheeling" on a slope.
Note
Not possible in conjunction with 14 HP Robin engine.
Attention
The intake grille must always be checked for contamination and cleaned.