Rapid Technic Orbito, Руководство по эксплуатации

Страница: 237 / 244

237 Machine No. from 10005200
EN
7.7 Changing the gear oil
7.8 Lubrication plan
Oil level check
• Bring the machine into a horizontal
position.
• Unscrew level screw (2).
• Check oil level, a little oil should come out
of the opening.
• If necessary, unscrew filling screw (1) and
add prescribed oil through filling port until
a little oil comes out of the level screw
opening (2).
• Screw in filling screw (1) and level screw (2).
Oil change
• Unscrew draining screw (3).
• Drain off oil.
• Screw in draining screw (3).
• Bring the machine into a horizontal
position.
• Unscrew filling screw (1) and level screw
(2) and add prescribed oil through filling
port until a little oil comes out of the level
screw opening (2).
• Screw in filling screw (1) and level screw (2).
1
2
3
Attention
The machine must be horizontal when adding oil or checking the oil level.
1) Left and right steering lever
2) Handlebar bearing (2x)
3) Connection nozzle
4) Connection shaft (PTO shaft)
Lubricating grease
Lithium soap base NLGI 2 (multi-purpose
grease).
1
2
4
3