Rapid Technic Orbito, Руководство по эксплуатации

Страница: 231 / 244

231 Machine No. from 10005200
EN
Indicator lamp flashing in red - fault!
Faults recognised by controller such as defective signals from operating elements are
indicated by a red blink code. The blink code is indicated by the number of long blink pulses.
The blink code is always terminated by a short blink pulse.
Blink code
Long pulses
Long pulses – short pulses Name
1 _... Rotary grip sensor
2 _ _... Left steering lever sensor
3 _ _ _... Right steering lever sensor
4 _ _ _ _... Left handlebar end sensor
5 _ _ _ _ _... Right handlebar end sensor
6
7 _ _ _ _ _ _ _... Left pump sensor
8 _ _ _ _ _ _ _ _... Right pump sensor
9 _ _ _ _ _ _ _ _ _... Left pump adjustment motor
10 _ _ _ _ _ _ _ _ _ _... Right pump adjustment motor
Note
• The blink code repeats continually.
• When the first fault occurs, stop engine, then restart engine and pay attention to indicator
lamp. If the fault is still present, it must be rectified immediately or a Rapid specialist
dealer must be consulted.
• The machine cannot be engaged if a fault is present. If necessary, the machine can be
moved, in spite of this, for loading by continuously pressing the clutch switch.
Caution
The machine may suddenly trap the operator or third persons, cause them to fall over or
run them over.
• If the "Fault" indicator lamp is flashing in red, it is forbidden to work with the machine.