Rane TTM 57SL Скачать руководство пользователя страница 2

Страница: 2 / 50

Introduction

Please read this manual to get the most from your TTM 57SL

and the included Scratch

LIVE

software. If you ever lose this, a

new copy may be downloaded at

www.rane.com/ttm57sl.html

To keep up with the latest tips and software updates, visit the

Official Scratch

LIVE

Forum at

scratchlive.net.

Minimum system requirements

• At least one turntable or CD player.

• Computer with USB 1 port supporting Full Speed Mode (USB 1.1).

• Screen resolution 1024 x 768 or higher.

• Hard drive space for storing music.

Mac

• 1 GHz G4 with 1 GB RAM

• OSX 10.3.9 or higher (Intel Mac compatible)

Windows

• 1.5 GHz PC with 1 GB RAM

• Windows XP with Service Pack 2 or higher, or Vista. We

recommend Windows XP over Vista for performance reasons.

By using XP, you can have a lower latency (for a better vinyl

feel) and better performance in general.

Note:

This is the

minimum

requirement to run Scratch

LIVE

. We

recommend a higher spec computer, and particularly if you

have a large library, you will benefit from having more RAM.

Note:

No sound card is necessary.

Check List

These items are included with the TTM 57SL in the box:

• Scratch

LIVE

software install disc.

• 2 (two) control CDs.

• 2 (two) control records.

• 1 USB cable.

• IEC C5 line cord.

• Package of 4 rubber feet.

• Quick Start Guide and this manual.

Copyright notices

LIVE

and

the Scratch

LIVE

logo are trademarks of Serato Audio Research.

Trademarked in the U.S. and other countries. Licensed exclu

sively to Rane Corporation. This software is based in part on the

work of the Independent JPEG Group, and uses libpng code,

and CDs are available for single use only — any further copying

or unauthorized reproduction is strictly prohibited. Windows

XP and Vista is either a registered trademark or a trademark of

Microsoft Corporation in the United States and/or other coun

tries. Apple, Mac, Macintosh and iTunes are trademarks of Apple

Computer, Inc., registered in the US and/or other countries.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or third prong is provided for

your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord and plug from being walked on or

pinched particularly at plugs, convenience receptacles, and the

point where it exits from the apparatus.

11. Only use attachments and accessories specified by Rane.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. The plug on the power cord is the AC mains disconnect

device and must remain readily operable.

16. This apparatus shall be connected to a mains socket outlet

with a protective earthing connection.

17. When permanently connected, an all-pole mains switch with

a contact separation of at least 3 mm in each pole shall be

incorporated in the electrical installation of the building.

18. If rackmounting, provide adequate ventilation. Equipment

may be located above or below this apparatus, but some

equipment (like large power amplifiers) may cause an

unacceptable amount of hum or may generate too much heat

and degrade the performance of this apparatus.

19. This apparatus may be installed in an industry standard

equipment rack. Use screws through all mounting holes to

provide the best support.

WARNING

: To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture. Apparatus shall not

be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

To reduce the risk of electrical shock, do not open the unit.

No user serviceable parts inside. Refer servicing to qualified

service personnel.

The symbols shown below are internationally accepted symbols that

warn of potential hazards with electrical products.

This symbol indicates that a dangerous voltage

constituting a risk of electric shock is present

within this unit.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

WARNING

Содержание TTM 57SL



















































Результаты поиска

Содержание TTM 57SL

Отзывы:

Похожие инструкции для TTM 57SL

Бренды по названию

Популярные бренды

Rane TTM 57SL, Руководство оператора

Результаты поиска

Содержание TTM 57SL

Отзывы:

Похожие инструкции для TTM 57SL

Бренды по названию

Популярные бренды