Rane TTM 57SL, Руководство оператора, Страница: 12 / 50

10
GROUP DECK
P1 P2
J1
B1 B2
1 2
B3 B4 B5 B6
J2
PROCESSOR 1
FREQUENCY RESONANCE
DEPTH TAP BPM
PROCESSOR 2 MULTIPLIER
PGM 1 PGM 2 AUX B MAIN ON ON
INSERT POINT CUE EFFECT
ALL WET
MORE
DRY
ALL DRY
MORE
WET
1
¾
¼ 8
2
½
16
4
P1
•
Frequency 31.5 Hz 16 kHz
Sweep
max 3.0
min 0.7
•
P2 P1
•
single
tap BPM
sync
point,
multiple
taps to set BPM.
Depth min
•
P2
Resonance
P1
•
Frequency 31.5 Hz 16 kHz
Sweep
min 0.7
max 6.0
•
P2
Resonance
•
P2 P1
•
single
tap BPM
sync
point,
multiple
taps to set BPM.
Depth min
P1
•
Frequency 31.5 Hz 16 kHz
Sweep
•
P2
max 3.0
min 0.7
P1
•
single
tap BPM
sync
point,
multiple
taps to set BPM.
Depth min
•
P2
Resonance
LP Filter Effect Response BP Filter Effect Response HP Filter Effect Response
Control Assignments for Sweep Filter Effects
Three Filters have the same parameters, but are different filter
types:
• LP Filter is an automatically sweepable Low Pass Filter.
• BP Filter is an automatically sweepable Band Pass Filter.
• HP Filter is an automatically sweepable High Pass Filter.
(In case you are wondering, a high pass is the same as a low cut.)
Each Filter’s settings are independent from the other Filters.
P1 Frequency / Tap BPM
If the track has a BPM tag, the Filter sweep automatically match -
es it and a lock icon appears in the Filter section. To manually
set the sweep BPM, tap
P1
to the beat. The default BPM is 120,
and tapping
P1
can set it from 24 to 480 with a resolution of 0.1
BPM. A single Tap of
P1
resyncs the sweep to the BPM.
The primary function of
P1
(indicator off ) is Cutoff Fre -
quency, which starts at 722 Hz and is adjustable from 31.5 Hz to
16 kHz (9 octaves). The full sweep of the filter is reached in 11/3
rotations of
P1
.
J1 Multiplier
The BPM Multiplier is selected with
J1
, which toggles between
transform operation and BPM multiplier. If the green mode
indicator is on ,
J1
may adjust the multiplier to 16, 8, 4, 2, 1, 3/4,
½, or ¼.
P2 Resonance / Depth
Resonance is adjusted using the primary function of
P2
(indica -
tor off ). The diagrams below show the different resonances for
each Filter type.
LP and HP Filter Resonance determines how peaked the
cutoff is, which is adjustable over a range of 0.7 to 3.0.
BP Filter Resonance determines the width of the peak, which
is adjustable over a range of 0.7 to 3.0.
Depth is adjusted using the second function of
P2
(green
indicator on ). Depth sets how far the sweep of the LFO (low
frequency oscillator) modulates the Frequency set by
P1
. The
Depth is adjustable ±4.5 octaves. The full range is reached in 11/3
rotations of P2. With Depth at minimum, the LFO ceases to
have any effect, and P1 becomes a manual sweep control.
J2 Wet / Dry
Pressing J2 toggles between transform operation (indicator off )
and Wet / Dry control (green indicator on ). The default is 100%
wet. Holding the joystick left goes more Dry, to the right goes
more Wet. Moving the joystick up provides instant, momentary
100% Wet. Moving the joystick down provides instant, momen -
tary 100% Dry. This allows Wet or Dry transforming with the
control returning to the set Wet/Dry ratio when the control is at
rest (in the center).