39
(Group B5) recording
To access this group, press the
GROUP
button on the mixer, then press
B5
. In this group you can select your input source, start and
stop recording, and load this new recording to either Virtual Deck.
Scroll through your crates and library.
Push to load track on right deck.
Push to load track on left deck.
Stop and erase the
last recording.
Start recording from
the footswitch.
Start recording.
Load to
left deck.
Load to
left deck.
Load to
right deck.
Load to
right deck.
Select recording
source by scrolling
up or down.
Functions vary depending
upon the assigned effect.
Functions vary depending
upon the assigned effect.
Tap to set BPM.
Turn effect on and off.
Assign effect to: PGM 1. PGM 2. AUX BUS. MAIN.
Select effect.
Cue
effect.
Effect
on / off.
BPM
multiplier.
Wet / Dry control.
– = more dry.
+ = more wet.
up = all wet.
down = all dry.
(Group B6) effects
The TTM 57SL has two built in effects processors. Unlike other groups, when you are in the effects group, the
DECK
button on the
mixer switches between these two effects processors.
DECK 1
activates Processor 1, and
DECK 2
activates Processor 2. Each effect has
parameters controlled by
P1
and
P2
. See the Effects section with all the details on page 8.
The left joystick,
J1
, sets the BPM (tempo) multiplier. Set the BPM by tapping P1 to the beat, or manually adjust by turning P1.
The optional footswitch can also tap in the BPM. Use the left joystick to quickly halve, split, double or quadruple the tempo.
The buttons B1 through B4 set the effect’s insert point: either PGM, the Aux bus (which includes the Mic) or the Main output.
