background image

22

Repeat

Use the repeat function to repeat the song across the 

entire length of the control record.

Tip: Short “loop” samples can be turned into a 

continuous track using the repeat function. The loops 
must be less than 10 seconds long, and cut at the start 
and end of a bar.

Autoplay

Click the 

auto

 button to 

enable autoplay. With this 

setting turned on, when one 

track finishes playing, the next 

track starts automatically. Load 

from a crate to play through 

the songs in that crate, or from 

your library to play through 

your library. Use the next 



and previous |



 buttons to 

jump to the next track or go to 

the previous track in the list. 

Autoplay works in both 

rela-

tive

 and 

internal

 modes. 

Play 

from start

 must be checked in 

the 

setup

 screen for autoplay to 

work correctly. See page 33.

Track gain

Use the track gain adjustment to 

balance the volume of the tracks 

in your library. Any adjustment 

made to the gain of a track is 

saved with the file, and will be 

reapplied to the entire track 

when it is loaded again.

The level meter shows 

the level sent to the hardware 

interface — after both individ

-

ual track gain and master gain 

adjustment.

Note: for automatic gain 

setting of your tracks, see Use 
auto gain on page 29.

Master gain

The master output of Scratch 

LIVE

 can be controlled 

using the 

master gain

 control. This adjusts the output 

volume of all tracks played. 

Note: for best results, set 

the master gain to the 12 o’clock position, and adjust 
the volume of individual tracks using the track gain 

adjustment

.

33 / 45 Speeds

Set this to match the speed of your 

turntable for normal playback.

Tracking indicator

The tracking indicators on the 

main screen show the quality of 

the signal coming from the con-

trol record or CD. The length 

of the bar indicates the speed 

of the record or CD. The color 

indicates the amount of position 

information Scratch 

LIVE

 is 

receiving. When you are playing 

the record at normal speed, the 

tracking indicator should be 

grey. If it is mostly red there is a 

problem reading the control sig-

nal. Make sure your needles are 

clean, and check the calibration 

in the 

setup

 screen. 

Note: it is 

normal for the light to be red 
when cueing or scratching.

Tap Tempo 

For tracks with no BPM information, there is a tap tempo button displayed where the BPM 

usually is, in the song info area. There is also an 

auto BPM

 feature described on page 18.

Pressing 

alt-space bar

 activates the tempo tapper (press 

alt-space bar

 a second time to activate 

the tempo tapper on the right Virtual Deck). Tap the space bar along with the beat. 

After you’ve tapped the first beat, you can switch to double time tapping, half time, start of 

each bar etc. The range is set by the first two taps, after that you can switch to any steady rhythm 

you feel comfortable with – quarter notes, half note, whole notes. 

Esc

 resets the BPM, 

Enter

 saves 

the BPM to the track. You can use the mouse if you prefer.

Your CD player or turntable’s pitch slider doesn’t need to be at zero, we do the math for 

you. You can also use the tempo tapper when no song is loaded, for finding the BPM of regular 

records, for example.

Key Lock

When Key Lock is on, the key 

or pitch of the song stays locked 

at what it would be if the track 

was playing at normal speed, 

regardless of the platter speed 

of the turntable or CD player. 

Key Lock has scratch detection, 

so that it automatically turns off 

when scratching for a natural 

scratching sound. Turn Key 

Lock on or off by pressing the 

button to the top right of the 

Virtual Deck. 

Tip: F5 and F10 will turn 

Key Lock on and off for the left 

and right decks respectively.

Содержание TTM 57SL



















































Отзывы: