R&S NRX-B4, Руководство пользователя

Страница: 371 / 450

Remote Control Commands
R&S
®
NRX
371 User Manual 1178.5566.02 ─ 05
SYSTem:SERRor:REMove <num>
Removes an entry from the list of static errors. The entry is identified by its error num-
ber.
Setting parameters:
<num> Unique sequence number
Usage: Setting only
SYSTem:SERRor[:ALL]?
Queries the (next) error from the list of static errors.
Usage: Query only
14.12.11 Locking
SYSTem:LOCK:SHARed:STRing?
Returns the lock string assigned to the locking group if shared locking is enabled.
Writes an error in the error queue if shared locking is not enabled.
Return values:
<result>
Usage: Query only
SYSTem:LOCK:TIMeout <timeout>
Sets the maximum time in milliseconds to wait when processing a command if the
device is locked and the sender of the command is not the owner of the lock before the
command is discarded and an error is written to the error queue.
Setting parameters:
<timeout>
Return values:
<result>
14.13 Using the Status Register
● General Status Register Commands .................................................................... 372
● Reading Out the CONDition Part .......................................................................... 372
● Reading Out the EVENt Part .................................................................................373
● Controlling the ENABle Part ..................................................................................373
● Controlling the Negative Transition Part ............................................................... 374
● Controlling the Positive Transition Part ................................................................. 374
Using the Status Register