RAM 1500 2019, Руководство пользователя

Страница: 71 / 340

4. Connect the chassis plug and bracket
(provided in the glove compartment) to
the chassis wiring harness and insert the
bracket back into the sill.
5. Connect the tailgate plug (provided in the
glove compartment) to the tailgate wiring
harness to ensure that the terminals do
not corrode.
6. Tape the tailgate harness and bracket
against the forward-facing surface of the
tailgate. This will prevent damaging the
connector and bracket when storing or
reinstalling the tailgate.
Removing The Tailgate
1. Disconnect the wiring harness for the rear
camera and or power locks (if equipped).
NOTE:
Refer to “Disconnecting The Rear Camera
And Remote Keyless Entry” in this sec-
tion.
2. Unlatch the tailgate and remove the sup-
port cables by releasing the lock tang from
the pivot.
NOTE:
Make sure tailgate is supported when
removing support cables.
3. Position the tailgate on a 45 degree angle.
4. Raise the right side of the tailgate until
the right side pivot clears the hanger
bracket.
5. Slide the entire tailgate to the right to free
the left side pivot.
6. Remove the tailgate from the vehicle.
NOTE:
Do not carry the tailgate loose in the truck
pickup box.
WARNING!
To avoid inhaling carbon monoxide, which
is deadly, the exhaust system on vehicles
equipped with “Cap or Slide-In Campers”
should extend beyond the overhanging
camper compartment and be free of leaks.
Locking Tailgate
The tailgate can be locked using the key fob
lock button.
TRI-FOLD TONNEAU COVER — IF
EQUIPPED
Your vehicle may be equipped with a Tri-Fold
Tonneau Cover which consists of different
features:
• Easy Tri-Fold cover
• Tonneau fore aft locator
• Crosscar inside bed locator
• Front and rear clamps
• Stowage strap
• Locking capability
NOTE:
The Tonneau Cover can be folded up and
secured at the front of the box without remov-
ing completely.
Tri-Fold Tonneau Cover Removal
To remove the Tonneau Cover follow the fol-
lowing steps:
1. Lower the tailgate to gain access to the
first set of two Tonneau Cover clamps
located on the driver and passenger un-
derside of the Tonneau Cover.
69