RAM 1500 2019, Руководство пользователя

Страница: 137 / 340

Quad or Crew Cab Trucks:
The top tether anchorages in this vehicle are
tether strap loops located between the rear
glass and the back of the rear seat. There is a
tether strap loop located behind each seating
position. Follow the steps below to attach the
tether strap of the child restraint.
Right Or Left Outboard Seats:
1. Reach between the rear seat and rear
glass to access the tether strap loop.
2. Place a child restraint on the seat and
adjust the tether strap so that it will reach
over the seat back, through the space
between the head restraint and the seat
back, through the tether strap loop behind
the seat and over to the tether strap loop
behind the center seat.
3. Pass the tether strap hook through the
space between the head restraint and the
seat back behind the child seat, through
the tether strap loop behind the seat and
over to the center tether strap loop.
4. Attach the hook to the center tether strap
loop (see diagram). Tighten the tether
strap according to the child seat manufac-
turer’s instructions.
NOTE:
If there are child seats in both of the outboard
(left and right) seating positions, the tether
strap hooks of both child seats should be
connected to the center tether strap loop.
This is the correct way to tether two outboard
child seats.
Tether Strap Through Outboard Tether
Strap Loop
Tether Strap Through Outboard Tether
Strap Loop And Attached To Center Tether
Strap Loop
135