3. Rotate the side gates closed allowing the
outboard ends to be positioned in front of
the cargo tie down loops.
4. Rotate the center handle horizontally to
secure the side gates in the closed
position.
5. Lock the center handle using the vehicle
key to secure the panel into place.
Divider Position
The divider position is intended for managing
your cargo and assisting in keeping cargo
from moving around the bed. There are 11 di-
vider slots along the bed inner panels which
allow for various positions to assist in manag-
ing your cargo.
To install the bed extender into a divider
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender
side gates.
2. With the side gates open, position the
extender so the outboard ends align with
the intended slots in the sides of the bed.
3. Rotate the side gates closed so that the
outboard ends are secured into the in-
tended slots of the bed.
4. Rotate the center handle horizontally to
secure the side gates in the closed
position.
5. Lock the center handle to secure the
panel into place.
Extender Position
The extender position allows you to load the
bed of the truck beyond the tail gate. The bed
extender will add an additional 15 inches
(38 cm) in the back of the truck when addi-
tional cargo room is needed. The extender
position utilizes a locating pin and rotating
handle located on both sides of the truck bed
near the tailgate.
To install the bed extender into the extender
position, perform the following:
1. Lower the tailgate.
2. Make sure the center handle is unlocked
and rotate the center handle vertically in
order to release the extender side gates.
3. Fit the end of the side gate ends onto the
pin and handle.
4. Rotate the handles to the horizontal posi-
tion to secure into place.
WARNING!
To reduce the risk of potential injury or
property damage:
• Cargo must be secured.
• Do not exceed cargo load rating of your
vehicle.
• Secure all loads to truck utilizing cargo
tie downs.
• Extender should not be used as cargo tie
down.
• When vehicle is in motion do not exceed
150 lbs (68 kg) load on the tailgate.
• The bed extender is not intended for off
road use.
• When not in use, the extender/divider
should be in stowed or divider position
with the tailgate closed.
• When in use all handles are to be in the
locked position.
67
Содержание 1500 2019
