RAM 1500 2019, Руководство пользователя

Страница: 72 / 340

2. Pull down on the first set of clamps on
both driver and passenger sides to the
semi clamped position.
3. Pull down on the clamp wire and push the
clamp up into the proper released position.
CAUTION!
Make sure the tonneau cover clamp and
clamp wire are in the proper released po-
sition. If the clamp and clamp wire are not
properly released, damage to the tonneau
cover material will result.
4. Pick up on the Tonneau Cover and fold it
back onto the second panel.
5. Pick up on the cover and fold it back onto
the third panel.
6. Once in the third panel position, pull
down on the second set of clamps on both
driver and passenger sides to the semi
clamped position.
NOTE:
When folding the center and rear panels,
the sections
MUST be held together to
avoid damage to the cover material.
7. Pull down on the clamp wire and push the
clamp up into the proper released
position.
8. Be sure to clip both stowage straps to-
gether to ensure the cover stays together.
9. With two people, remove the cover.
NOTE:
Be sure the Tonneau Cover has been folded
completely before removing.
Tri-Fold Tonneau Cover
Installation
To install the Tonneau Cover follow the follow-
ing steps:
1. Position the folded Tonneau Cover on the
truck bed and push the cover forward
against the front of the truck bed. The
Tonneau Cover centers itself when placed
on the vehicle.
2. Pull down on the first set of clamp
handles to release the clamps from the
stowed position.
3. Push clamp wires up and under the flange
of box (or flange of Ram Box rail, if
equipped) to the semi clamped position.
4. Push clamp handles upward to the
clamped position to properly engage the
clamps.
NOTE:
Once clamped, be sure the clamps are not
partially clamped to the truck bed flange.
5. Disengage the stowage straps.
6. Unfold Tonneau Cover to the intermediate
position.
NOTE:
The vehicle cannot be driven when the
Tonneau Cover is in this position.
7. Completely unfold the Tonneau Cover.
NOTE:
When folding the center and rear panels,
the sections
MUST be held together to
avoid damage to the cover material.
8. Pull down on the second set of clamp
handles to release the clamps from the
stowed position.
GETTING
TO
KNOW
YOUR
VEHICLE
70