Chapter 2 Hardware Installation
Figure 2-19: Cable Clamp and Cable Strap (Cable Mount)
2.10.2
Cable Clamp Installation
Step 1.
Connect a power cord to a subsystem power socket so that you
can determine the correct position of the cable clamp along the
cable strap. The diagram below shows the relative positions of a
power cord, cable clamp, and cable strap.
Figure 2-20: Power Cord, Cable Clamp and Cable Strap Positions
Step 2.
Connect the cable clamp to the cable strap.
Insert the flat angled
end of the cable strap through the small opening (the tie head)
underneath the cable clamp with the smooth side of the strap
facing up and the ribbed side facing down and the release tab at
the end. Press down the release tab to adjust the position of the
cable clamp along the strap. See the diagram below.
Power Cord Cable Clamp Installation
2-19
