![background image](http://html1.mh-extra.com/html/raid/falcon-24-bay/falcon-24-bay_installation-and-hardware-reference-manual_3391962044.webp)
Falcon 24 Dual Fibre Installation and Hardware Reference Manual
Figure 2-21: Inserting Cable Strap into Cable Clamp
Step 3.
Mount the cable strap to the chassis by
inserting the push-in barb
anchor into the pre-drilled hole underneath the power supply.
Step 4.
Secure the power cord with the cable clamp.
Flip open the cable
clamp and wrap it around the power plug. If necessary, use the
release tab to adjust the location of the clamp so it aligns with the
base of the power cord as shown below. Press the clip lock on the
side of the clamp until it snaps into position. Now the power cord
connection is secured.
Figure 2-22: Power Cord Locked into Position
Step 5.
Repeat the process to secure every power cords to the subsystem.
2-20
Power Cord Cable Clamp Installation