Falcon 24 Dual Fibre Installation and Hardware Reference Manual
Figure 2-18: Drive Tray Key-lock Rotation
WARNING!
All the drive trays must be installed into the enclosure even if they currently do
not contain a hard drive. If the drive trays are not installed, then the ventilation
required for cooling will not be normalized and the subsystem will be damaged.
2.10. Power Cord Cable Clamp Installation
Several cable clamp assemblies are included in the accessories boxes in the
FALCON shipping package.
When installing the subsystem, it is recommended to
secure all power cords
using these cable clamps to
help prevent accidental
disconnection of power cords that could result in costly down time.
2.10.1
Component Description
Each cable clamp consists of the following:
1.
A cable strap with a “push barb” anchor mount
2.
An adjustable cable clamp
The cable strap is secured to the chassis by inserting the barb anchor into the pre-
drilled hole located under each power supply module. The cable clamp is then
secured to the cable strap and is wrapped around the power cord to hold the
subsystem’s power plug in place to ensure that the power cord connection can
withstand shock, vibration and accidental impact.
2-18
Power Cord Cable Clamp Installation
