Falcon 24 Dual Fibre Installation and Hardware Reference Manual
1.2. Subsystem Components
1.2.1 LCD Keypad Panel
Figure 1-6: LCD Keypad Panel
The LCD keypad panel shown in
Figure 1-6
consists of an LCD display with push
buttons and LEDs that indicate array status. The LCD panel provides full access to
all RAID configurations and monitoring options. After powering up the subsystem,
the initial screen will show the subsystem model name. A different name may be
assigned for the system, host ports, or specific logical drives. This will enable ease of
identification in a topology with numerous arrays.
1.2.2 Drive Trays
Part Number:
IFT-9274CDTray (empty tray without MUX board)
IFT-9274ADT2S1S (drive tray with a MUX conversion board)
Figure 1-7: Drive Tray Front View
The subsystems’ twenty-four (24) drive trays accommodate separately purchased,
standard 1-inch pitch, 3.5-inch disk drives. The drive bays are accessed through the
front of the enclosure. Two (2) LEDs on each tray bezel indicate the disk drive’s
operating status. A key-lock on each drive tray secures the hard drive in place, while a
maize color release button ensures fast and efficient drive swapping.
1-6
Subsystem Components