Falcon 24 Dual Fibre Installation and Hardware Reference Manual
Figure 2-8: Attaching M5 Cage Nuts to Rack Posts
CAUTION!
The mounting positions on the rack posts must be carefully measured so that
rails are mounted parallel to each other. Also pay attention to the clearance
between the rack-mounted units.
Step 5. Attach a spacer (#10 in the packing list) to the back of each
enclosure forearm handle using three (3) included flathead
screws (#7 in the packing list).
Figure
2
-9: Attaching Spacers to the Back of Enclosure Forearm Handles
Step 6. Use the included crosshead round screws (#9 in the packing
list) to secure two (2) end brackets (#3 or #4) to the back of
the subsystem.
2-12
Rackmounting the Subsystem
