Falcon 24 Dual Fibre Installation and Hardware Reference Manual
2.5. Unpacking the Subsystem
The subsystem components are packed in several boxes.
WARNING!
For a detailed packing list, refer to the included Unpacking List. Do not rely on the
non-definitive, summarized checklist shown below--it is for reference only.
The following items should be packed in individual boxes and are not pre-installed:
Twenty four (24) drive trays
Accessory items
The enclosure chassis, with its pre-installed components, is located at the bottom of
the package. The pre-installed components include:
Two (2) controller modules
Three (3) PSU modules
Two (2) cooling modules
Two (2) front handles
One (1) LCD keypad panel on the left side foldable handle
Back-end PCBs
2.6. Memory Module Installation
2.6.1 Memory Module Installation Overview
The subsystem comes with a pre-installed 512MB DDR RAM DIMM module on
each controller. The controller supports memory modules with sizes up to 2GB. If
memory modules with a different size need to be used, the pre-installed DIMM
module can be removed and the new ones installed. Replacement and installation
instructions are described fully below.
NOTE:
A DIMM of a different size can be ordered from your subsystem supplier. Using
non-certified modules can cause unexpected results.
2-4
Unpacking the Subsystem