ppbRAE 3000 User’s Guide
Exiting Three-Point Calibration
When you are done performing calibrations, press [MODE], which
corresponds with “Back” on the display. You will see the following
message:
Updating settings…
The instrument updates its settings and then returns to the main
display. It begins or resumes monitoring.
Programming Mode
Programming Mode can be entered from either Hygiene Mode or
Search Mode. If the current user mode is Basic, you must provide a 4-
digit password to enter.
Entering Programming Mode
1. Press and hold [MODE] and [N/-] until you see the Password
screen.
2. Input the 4-digit password:
•
Increase the number from 0 through 9 by pressing [Y/+].
•
Step from digit to digit using [N/-].
•
Press [MODE] when you are done.
If you make a mistake, you can cycle through the digits by pressing
[N/-] and then using [Y/+] to change the number in each position.
46
Содержание ppbRAE 3000
