RADWAG HRP.R Series, Руководство пользователя

Страница: 123 / 148

- 123 -
The setting is valid for continuous transmission in calibration unit and in current unit
activated by means of the scale (see parameter P4.2.1.2), it is also valid for
continuous transmission activated by command sent from a computer (read section
14 COMMUNICATION PROTOCOL).
19.1.4 Cooperation with E2R
E2R is a control system, it controls all weighings performed on a scale. Upon
activation of this option, operations on some Databases are possible only with the
use of a computer (options are not accessible on a scale). In order to start
cooperation with E2R system set <YES> value of <E2R SYSTEM> parameter.
CAUTION!
<E2R System> parameter activation may be carried out by the device manufacturer
or authorized persons, exclusively.
19.2 Printer
<PRINTER> submenu has been designed to allow you to choose a port and
a device, to which the data is to be sent upon pressing button. Content of
data being transferred is set in parameter <PRINTOUTS/PRINTOUT GLP>.
Procedure:
•
press button,
•
enter <P4 DEVICES> menu,
•
enter <P4.2 PRINTER> submenu,
•
set parameters related to cooperation with the printer, i.e. port to which the
printer is to be connected, <P4.2.1 PORT>.
Accessible option:
•
COM 1
– RS 232 port, to which the printer is connected.
For exemplary measurement printout, Read section on printouts.
As a user you can send a controlling code (of a hexadecimal form) to a printer
either at the beginning of the printout - <P4.2.2 PREFIX> or at the end of it -
<P4.2.3 SUFFIX>. Sending these codes allows you to control globally both,
information and actions carried out at the beginning and/or at the end of each
printout sent from a scale to a printer.
This function is most frequently used to send an information about the code page of
a printout that had been sent by a scale, at the beginning, and to send a command
enabling the crop of a paper in EPSON printers (if the printer is equipped with an
autocutter blade), at the end.