RADWAG HRP.R Series, Руководство пользователя

Страница: 10 / 148

- 10 -
1.3 Usage precautions
Do not use the scale as a dynamic weighing instrument. Even if small quantities of
weighed material are added or removed from the weighing pan of the instrument,
the reading should be taken only after stabilisation of the measurement results. Do
not place any magnetic materials on the weighing pan, as this can cause damage
to the measuring system of the instrument.
Be sure to avoid impact shock and overloading the scale in excess of the
prescribed maximum measuring range (max capacity), minus any possible tare
weight that has been applied.
Never use the scale in an environment where explosion is possible. This scale has
not been adjusted for operation in hazardous areas.
There must not be any modification made to the scale.
1.4 Warranty
Warranty is invalid for the following:
•
non- observation of the guidelines of this user manual,
•
use of the scale other than specified in this manual,
•
alteration to or opening of the device,
•
mechanical damage and damage caused by media, water, wear and tear,
•
inappropriate assembling or defects of electric installation,
•
overloading of the measuring instrument.
1.5 Metrological parameters monitoring
Metrological characteristics of the scale require periodical inspection to be carried
out by its user. Inspection frequency is dependent on ambient conditions in which
the scale is used, types of performed processes and accepted quality management
system in organization.
1.6 User manual significance
Please read the user manual carefully before assembling and start-up, even if you
are experienced with this type of weighing instruments.
1.7 Staff training
This scale should only be operated and maintained by personnel who is trained and
experienced in using this type of scales.