25
GB
Setting the braking distance
2.
/
3.
Keys
LED display
4.
5.
/
. . .
Press for two
seconds
1.
Call up the menu.
Select function „Braking distance“.
Confirm selection .
The braking distance set will flash on the display.
Set braking distance.
=
short braking distance
=
long braking distance
=
factory setting
Return to menu.
OK
OK
OK
The braking distance helps to determine how strongly the drive or the sliding unit brakes before
the end points are reached. The braking distance can be adjusted to correspond to the weight of
the sliding unit (door panel or shutter) and the running performance.
NOTE
If the sliding unit stops suddenly while braking then travels in the opposite direction, the braking
distance has been set incorrectly. As too much force is used in braking when this happens, obstacle
detection is triggered and is shown in the display.
It may be necessary to carry out a series of trial runs to set the braking distance correctly.
Weight of sliding unit
Braking distance
light
=
short braking distance
heavy
=
long braking distance
factory setting
=
IMPORTANT
Repeating end point search and reference runs.
Every time the braking distance is altered the end points, as well as the reference run settings,
are automatically deleted and must be repeated (see page 22/23).
