23
GB
Starting automatic end point search
Keys
LED display
2.
/
3.
4.
Press for three
seconds
6.
7.
. . .
5.
Press
repeatedly
Only in the event that the direction of travel is incorrect, otherwise continue from number 6
Press for two
seconds
1.
OK
OK
OK
OK
Call up the menu.
Select function „Find end points“.
Confirm function „Find end points“.
The symbol appears and flashes.
The search run starts, the sliding door/
sliding shutter opens.
Release the key as soon as the drive starts up. The search
always begins in an „opening“ direction.
Cancel „Find end point“.
IMPORTANT
If the end point search starts in a „closing“ direction,
you should cancel the search run by repeatedly pressing
the
OK
key, then reverse the direction of travel in menu
(see page 24).
The drive carries out the automatic end point
search.
Completion of four automatic reference
runs.
As soon as the two end points have been found and
saved, four automatic reference runs are performed to
ascertain the force setting required.
NOTE
◆
The number of runs remaining are shown in a
flashing display.
◆
After the reference run the drive is idle .
