20
GB
Calling up the menu and selecting a function (Example)
Display after plugging the power unit
into a 230 V socket.
The drive is idle (in standby mode).
1.
OK
Press for two
seconds
Select a function.
e.g. „Function of control input
A
“
3.
/
4.
5.
/
Keys
LED display
Call up the menu.
Confirm the selection and switch to
setting mode.
The display flashes.
Set the required function.
e.g. (closer contact, NC)
Return to menu.
Exit the menu.
The drive then returns to idle.
NOTE
If no key is pressed for 30 seconds, the drive auto-
matically returns to idle mode.
Changes to settings are nevertheless saved.
6.
7.
2.
Press for two
seconds
OK
OK
OK
