RACOM RAy11, Руководство пользователя

Страница: 78 / 177

6.3.5. Settings – Service access
Services
Access routes for link configuration.
Fig. 6.14: Configuration menu Settings – Service access – Services
Service IP address, by default 192.168.169.169 for L station and 192.168.169.170
for U station. Four addresses 169.254.173.236/30 are used for internal communication.
Must not be used as service IP address. IPv4 address
For easier identification of service IP address, RAy is equipped with LLDP protocol.
Protocol sends a broadcast every 60 seconds with the following information:
- IP address – under LLDP: Management address
- Serial number – LLDP: System Description
- Type (e.g. RAY17_L) – LLDP: Chassis Subtype
- DATA_PORT for version with 1 eth or SERVICE_PORT for version with 2 eth –
under LLDP: Port Subtype
Message can be recorded and converted into a readable form using a LLDP client.
A suitable tool for this purpose is Wireshark IP traffic analysing tool, with free licenses
Unknown IP
address
available both for Windows and Linux. To locate the message easily, use the Capture
filter "ether proto 0x88cc” in Wireshark.
Mask for service access, 24 by default. Netmask
Default gateway for service access, empty by default. Gateway
Allowing access via HTTP server (for HTTP and HTTPS protocol). Attention: after
disabling access via HTTP server, you will not be able to access the unit using a web
browser! HTTP(S)
RAy Microwave Link – © RACOM s.r.o. 78
Configuration